Two wings of verdigris bronze sit either side of a recessed mirror-polished stainless steel vertical rill, down which water courses. Volante is supported on a stainless steel tank. LED lighting incorporated.
Volante is 165cm in height, including the reservoir tank, which is 35cm high, 30cm square and 52.5cm at its broadest point. This piece can be scaled up or down on request. Also available in oxidised steel and kiln-formed glass
This stylish Art Deco inspired water feature works equally well indoors.
Prices start at £19,770 including VAT, delivery and installation to mainland UK, pump and lighting. Excludes reservoir.
Volante is made from bronze, to which we apply a Verdigris patina, with a two-sided central vertical rill of mirror polished stainless steel.
Volante is 165cm in height, including the reservoir tank, which is 35cm high and 30cm square, and 52.5cm at its broadest point. This piece can be scaled up or down on request.
The Volante can be supplied with a reservoir tank, included in the height above, or can be placed on the surface of an existing pool.
The price includes the reservoir tank, the feature pump which is placed inside the tank, and an LED uplighter each side with driver. An electricity supply will be required details of which we provide, and we strongly recommend the inclusion of a filtration unit to keep the work pristine. To avoid the possibility of limescale build up it is highly recommended that the water supply for this feature is softened.
Installation and delivery are included in the price for UK commissions, and for overseas shipping quotes can be obtained and charged at cost.
If installed correctly with a suitable filtration and softening package, then maintenance required is minimal. Typically, this would consist of draining the piece a few times a year, removal of any debris and refilling with fresh water. In areas of hard water or high salt content, the tank will need to be drained down more frequently as the concentration of salts in the water increases over time. Cleaning the bronze and stainless-steel rill should be undertaken using a soft, lint free cloth only, taking care to ensure that no grit is on the cloth that may cause scratching. Maintenance instructions will be issued on installation.